ARC S1HB offers one-coat protection with UV luminescence technology for easy, in-process inspection.
Groveland, MA ̶ November 4, 2019
Chesterton’s latest innovation in coating protection is ARC S1HB, a single coat, low VOC barrier coating that protects both metallic and cementitious surfaces from corrosive exposures.
S1HB’s high-build, edge-retentive properties ensure maximum coating coverage over hard 90° edges and corners with minimal thinning at the sharp edges.
ARC S1HB includes a fluorescent pigment that enables applicators to perform immediate QC inspection using a portable, ASTM E2501-approved UV light source. Because these checks can be accomplished during application, it speeds up the coating process and ensures higher initial quality.
“ARC S1HB enables in-process inspection to identify pinhole errors in coverages as small as 0.25 mils. At the same time, it ensures uniformity of coverage and film thickness.” says Stephen Bowditch, Director of Product Line Management for ARC Coatings. “The end result will almost always be a longer-lasting, better performing coating installation.”
ARC S1HB is a micro-glass reinforced, amidoamine-cured, modified epoxy lining. It can be applied as a one-coat system or used as a primer coat for two-coat systems. ARC S1HB bonds and cures to damp and marginally prepared surfaces. It is resistant to a broad spectrum of corrosive agents including H2S, hydrocarbons, wastewater flows, brackish and marine water exposures, as well as mild acid and caustic solutions.
ARC S1HB Coating is suited for structures such as:
• Crude oil storage tanks
• Chemical storage tanks
• Thickener tanks
• Wastewater clarifiers
• Grit chambers
• Wet wells
• Junction boxes
ARC S1HB is acceptable for use with cathodic protection systems, has high dielectric properties, allowing high voltage spark testing per NACE SP 0188.Product datasheet ARC S1HB
ViewIn RFID Technology for Mechanical Seals
Wireless Seal Identification and Recordkeeping in an Easy-to-Use Mobile App
Chesterton seals embedded with ViewIn™ Chesterton Technology give your maintenance staff the ability to scan equipment quickly and safely while in operation to identify the type of Chesterton seal and obtain related pressure test reports, device drawings, and other helpful data using a mobile app.
Your team will have the information they need within minutes.!
This innovative technology is included with the following seals shipped out after October 1, 2018:
Efficient and Convenient Seal Management
Chesterton mechanical seals equipped with ViewIn Chesterton Technology have Radio Frequency Identification (RFID) tags installed in the seal gland containing a unique serial number. You can easily log all seals into the ViewIn app using a Bluetooth-enabled RFID reader.
Once your seals are logged in, you can scan seals at any time to get information that includes:
• Mechanical Seal Description
• Serial Number
• Product Item Number
• Seal Construction Materials
• Individual Seal Test Report
• Installation Instructions
• Device Drawings
Proudly we announce that as per April 2018 Sellon has an IECEx-03 certified Workshop. Sellon is allowed to carry out the maintenance and overhaul of mechanically rotating ATEX equipment.
View our ‘IECEX DEK S0032’ certificate:
This heavy duty pump set is one of the first we will supply to a global dairy company. The pumps will be used in heavy duty applications with a very abrasive medium. The pump housing and impeller are executed in Duplex steel (CD4M), the shaft is full SS316 (1.7/16”) and the bearings are protected by the high quality labyrinth seals from Chesterton.
The impeller is adjustable from the back, the Chesterton cartridge Heavy Duty 280 seal is equipped with a Plan 53A seal support system.
The pump is mounted on a special designed frame in SS316, and is adjustable in height. The pump is calculated by Sellon, supplied, mounted and aligned on-site. Sellon delivered the ANSI pump with a remarkable lead time of 4 – 6 weeks.